What “DJI Avata OSD not showing” usually means
If you are seeing a blank or incomplete on-screen display while flying the DJI Avata, the issue is usually tied to goggles settings, recording overlays, or a firmware mismatch.
The good news is that the OSD is often easy to restore once you know where the display data is being turned off.
The Avata’s flight information can appear in different places depending on your setup: DJI Goggles, the DJI Fly app, and recorded video overlays.
That is why a missing OSD can look like one problem but actually come from several different settings.
What the OSD includes on DJI Avata
On DJI Avata systems, the on-screen display typically shows flight telemetry and status information such as battery level, GPS-related data, speed, altitude, distance, signal strength, and warnings.
Depending on your goggles and mode, you may also see camera settings, recording indicators, and aircraft connection status.
For pilots, the OSD is more than a convenience.
It helps confirm safe flight conditions, monitor battery usage, and maintain awareness of link quality between the drone and goggles.
When the OSD is missing, it becomes harder to fly confidently, especially indoors or in manual mode.
Common reasons DJI Avata OSD is not showing
Several different causes can lead to missing or partial OSD information.
The most common include:
- OSD display settings disabled in DJI Goggles or DJI Fly
- Incorrect display mode or view layout
- Firmware mismatch between the aircraft, goggles, and motion controller or remote controller
- Video output or recording overlay settings turned off
- Temporary connection issue after pairing or firmware updates
- App cache, app version, or device compatibility problems
Because the DJI Avata system depends on multiple linked components, a setting changed in one device can affect what appears on another.
Check the goggles display settings first
The most direct fix is to inspect the goggles menu.
Many pilots discover that the OSD was simply minimized, hidden, or changed to a cleaner display mode.
Look for a display layout option
In DJI Goggles, find the menu related to display, overlay, or flight data.
Depending on the goggles model, the option may be labeled differently, but the goal is the same: make sure telemetry and HUD elements are enabled.
Set the display to a full informational view rather than a minimal or cinema-style interface.
If a clean view is selected, the goggles may still show the live image while hiding most or all OSD elements.
Reset display preferences if needed
If you are unsure which setting changed, restore the default goggles display configuration.
This is often the fastest way to bring back missing flight data without having to test each option one by one.
Verify DJI Fly app overlay settings
When using the DJI Fly app, the OSD may be affected by overlay or recording preferences.
If the app is responsible for the missing data, the live goggles feed may still look normal while exported recordings do not include the flight information.
Check these areas in DJI Fly:
- Camera display settings
- Recording overlay or on-screen information options
- Flight assistant and telemetry display options
- Any custom layout or simplified view mode
It is important to separate live display from recording output.
A setting that removes the overlay from the recorded file does not always remove it from the goggles, and the reverse can also be true.
Make sure firmware versions match
Firmware mismatch is one of the most overlooked reasons for DJI Avata OSD not showing correctly.
If the aircraft, goggles, and controller are not on compatible firmware versions, the system may still connect but fail to show the full interface.
Update or verify firmware for all connected components:
- DJI Avata aircraft
- DJI Goggles
- Motion Controller or DJI Remote Controller
- DJI Fly app
After updates, restart every device and reconnect them in the correct order.
If the OSD problem started right after an update, compatibility or incomplete installation is especially likely.
Confirm the flight mode and camera mode
Certain flight or camera modes can change what you see on screen.
While the OSD should still appear, some views reduce the amount of visible data.
For example, a simplified camera interface may hide extra telemetry.
Likewise, if you are in a mode focused on FPV immersion, the system may prioritize the live feed and reduce visual clutter.
Switch between available display modes and test whether the OSD returns.
If it does, the issue is not a failure but a view setting that can be adjusted for your flying style.
Restart and reconnect the system
A basic reboot often resolves temporary display glitches.
Power down the aircraft, goggles, and controller, then turn them back on in a clean sequence.
This can refresh the video link and restore the OSD if the problem was caused by a transient communication error.
Use this order for a clean reset:
- Turn off the aircraft, goggles, and controller.
- Wait several seconds to fully clear the session.
- Power on the goggles first.
- Turn on the aircraft.
- Reconnect the controller or motion controller.
If the display returns after a restart, the issue was likely temporary rather than a deeper hardware or configuration fault.
Check whether the OSD is missing in live view or only in recordings
This distinction matters.
If the OSD is visible in the goggles but absent in the saved video, the problem is usually a recording or export setting.
If the OSD is absent in both the live feed and the recording, the issue is more likely tied to goggles display settings or firmware.
Many pilots assume the drone itself is at fault when only the recorded file is missing telemetry.
In practice, the live feed and file overlay often have separate controls.
Inspect the SD card and recording environment
Recording-related problems can also come from the storage side.
A damaged, slow, or nearly full microSD card may cause incomplete saves or unstable camera behavior.
Although this does not usually remove the live OSD, it can affect whether overlay data is captured properly.
Use a high-quality microSD card recommended for DJI equipment, and format it in the device when appropriate.
If you notice missing OSD only in playback files, test with another card to rule out storage corruption.
When the issue may be hardware-related
If you have already checked settings, updates, and restarts, the problem may be tied to a hardware fault or damaged connection.
A failing display cable, goggles screen issue, or aircraft video transmission problem can all interfere with what appears on screen.
Signs that point to hardware trouble include:
- Black screen or intermittent feed in addition to missing OSD
- OSD missing on multiple controllers and goggles
- Artifacts, freezing, or signal drops during flight
- Problem appearing after a crash or impact
At that point, contacting DJI support or an authorized repair center is the most reliable next step.
Best troubleshooting order for DJI Avata OSD not showing
To save time, work through the most likely fixes first:
- Check goggles display and HUD settings
- Review DJI Fly overlay and recording options
- Update firmware on all devices
- Restart the aircraft, goggles, and controller
- Test another display mode
- Try a different microSD card if recordings are affected
- Evaluate for possible hardware damage
Following this sequence helps isolate whether the missing OSD is caused by configuration, software, or hardware.
In most cases, the problem is resolved before reaching the final steps.
How to prevent the problem from coming back
Once the OSD is working again, a few habits can reduce the chance of it disappearing in the future.
Keep all DJI components on compatible firmware, avoid changing display settings right before a flight without testing them, and update the DJI Fly app only when you can verify your setup afterward.
It also helps to keep a short checklist before flying:
- Goggles connected and displaying flight data
- Aircraft and controller on matching firmware
- Recording settings verified if you need overlays in saved footage
- microSD card inserted and formatted
- Battery and signal indicators visible in the goggles
With the right settings in place, DJI Avata should show the flight data you need without distraction.