Why the Holy Stone HS110D WiFi Not Showing Issue Happens
If your Holy Stone HS110D WiFi is not showing in the app or on your phone’s Wi-Fi list, the problem usually comes from setup, signal, or compatibility issues.
The good news is that most cases can be traced to a few predictable causes, and many can be fixed without replacing the drone.
The HS110D is a beginner-friendly Holy Stone quadcopter that relies on a direct Wi-Fi link for live video and app control.
Because that connection is handled differently from standard home Wi-Fi, even small mistakes during pairing can stop the network from appearing.
How the HS110D Wi-Fi Connection Works
The HS110D creates its own 2.4 GHz Wi-Fi hotspot, which your smartphone connects to directly.
This hotspot is used by the Holy Stone app for live FPV video and basic control functions.
Unlike a router-based connection, the drone’s Wi-Fi signal is short range and sensitive to interference.
If the drone is powered off, the battery is weak, or the app is not installed correctly, the Wi-Fi network may not broadcast at all or may appear briefly and disappear.
Quick Checks Before Troubleshooting
- Make sure the drone battery is charged and fully connected.
- Power on the drone and wait for the indicator lights to stabilize.
- Move to an open area away from routers, Bluetooth devices, and other drones.
- Confirm that your phone’s Wi-Fi is enabled.
- Use a 2.4 GHz compatible phone and app version.
These basic checks eliminate the most common setup errors before you spend time on deeper troubleshooting.
Is the Drone Actually Broadcasting Wi-Fi?
If the Holy Stone HS110D WiFi not showing problem appears on your phone, first verify whether the drone is broadcasting a hotspot at all.
On many HS110D units, the network name appears only after the drone has finished booting.
Listen and look for the drone’s startup indicators.
If the lights never stabilize or the drone shuts off quickly, the battery may be too low to activate the Wi-Fi module.
What the Wi-Fi name may look like
- HS110D
- Holy Stone
- A model-specific SSID from the app instructions
Some users expect the network to appear under a different name, so always check the manual or app pairing guide for the exact SSID format.
Common Reasons the Wi-Fi Network Does Not Appear
1. The drone battery is low
A weak battery can power the flight controller but not the Wi-Fi transmitter reliably.
Charge the battery fully before pairing and test again.
2. The app is not installed or opened correctly
The Holy Stone app may be required to activate certain pairing steps.
If the app is outdated, corrupted, or denied permissions, the connection process can fail before the SSID shows up.
3. Your phone is connecting to the wrong band
The HS110D uses 2.4 GHz Wi-Fi, not 5 GHz.
If your phone is prioritizing 5 GHz home networks or auto-joining saved Wi-Fi, it may ignore the drone’s hotspot.
4. Interference is blocking the signal
Dense Wi-Fi environments, Bluetooth speakers, microwaves, and multiple nearby controllers can weaken the drone’s short-range signal.
Move to a clear location for testing.
5. The drone is not in pairing mode
Some Holy Stone drones require a specific power-on sequence before the hotspot becomes visible.
If the order is wrong, the SSID may never broadcast.
Step-by-Step Fixes for Holy Stone HS110D WiFi Not Showing
Restart the drone and phone
Turn off the drone, close the app, and restart your phone.
Then power the drone back on and wait a full minute before checking available networks again.
Forget saved network conflicts
If your phone has previously connected to other Wi-Fi sources, it may try to reconnect automatically.
Temporarily forget saved networks that interfere with setup, especially if your phone keeps leaving the drone hotspot.
Install or update the official Holy Stone app
Use the latest version from the Apple App Store or Google Play.
App updates often improve compatibility with iOS and Android permissions, location access, and device discovery.
Enable all required permissions
Many Android phones require location permissions for Wi-Fi scanning.
If the app cannot access location or nearby devices, the HS110D network may not appear even when the drone is broadcasting.
Test on another smartphone
If the Wi-Fi still does not show, try a second phone.
This helps isolate whether the issue is with the drone or with the original device’s network settings.
Phone Settings That Can Block the HS110D Signal
Modern smartphones use aggressive network optimization features that can interfere with drone Wi-Fi.
These are worth checking if the Holy Stone HS110D WiFi not showing issue keeps happening.
- Wi-Fi Assist or adaptive switching features
- Private DNS or VPN apps
- Battery saver mode limiting scanning
- Auto-join behavior for known home networks
- Location services turned off
Disabling these temporarily can improve SSID visibility during setup.
Once the drone is connected, you can turn some settings back on if needed.
When the App Sees the Drone but the Video Feed Fails
Sometimes the Wi-Fi name appears, but live video does not load.
That is a different issue from Wi-Fi not showing, but the causes are often related.
If the app connects but the screen stays black, check whether the phone is still linked to the drone’s hotspot, not a home router.
Also confirm that the camera lens is unobstructed and the drone battery remains charged during pairing.
Try these video-specific checks
- Reconnect after forgetting the drone network and rejoining it
- Close background apps using camera or network resources
- Move farther from routers that may cause channel interference
- Reopen the app after the connection is stable
Firmware, Hardware, and Reset Considerations
Most HS110D units do not require advanced maintenance, but firmware glitches or hardware wear can still affect Wi-Fi output.
If the drone was dropped, exposed to moisture, or stored with a damaged battery, the wireless board may not initialize correctly.
If your model supports firmware updates through the Holy Stone app, follow the manufacturer’s instructions exactly.
Avoid interrupting the process, since a failed update can make connectivity worse.
When the drone never broadcasts any Wi-Fi network after battery replacement, app reinstall, and phone testing, the problem may be hardware-related.
In that case, Holy Stone customer support can help confirm whether the unit needs repair or replacement.
Best Practices to Prevent Future Wi-Fi Problems
- Charge the battery fully before every pairing session.
- Use the recommended Holy Stone app version.
- Pair in an open area with minimal wireless interference.
- Keep your phone’s Wi-Fi and location settings enabled during setup.
- Avoid switching between multiple networks while connecting.
- Store the drone and battery properly between flights.
Following these habits reduces the chances of seeing the Holy Stone HS110D WiFi not showing issue again and makes setup faster each time you fly.
When to Contact Support
If you have charged the battery, confirmed the app, checked permissions, tested another phone, and still cannot see the network, contact Holy Stone support.
Provide the exact model number, your phone model, operating system version, and a description of the startup lights or sounds.
That information helps support teams determine whether the issue is a pairing error, an app compatibility problem, or a failed Wi-Fi module inside the drone.