Why the Holy Stone HS175 WiFi Not Showing Happens
If the Holy Stone HS175 WiFi is not showing on your phone, the issue usually comes down to pairing mode, app permissions, phone settings, or a connection reset problem.
This guide explains the most common causes and the exact steps to get the drone’s Wi-Fi network visible again.
The HS175 uses a smartphone connection for live video and app-based controls, so even a small setup issue can prevent the network from appearing.
The good news is that most cases are fixable without replacing parts or contacting support.
What the HS175 Wi-Fi System Is Supposed to Do
The Holy Stone HS175 creates a local Wi-Fi signal that your smartphone connects to through the Holy Stone app or through your phone’s Wi-Fi settings, depending on the setup flow.
In normal operation, the drone broadcasts its SSID after it powers on and enters pairing mode.
- The drone battery must be charged and installed correctly.
- The drone must be powered on long enough to complete startup.
- Your phone must be close enough to detect the signal.
- The app and phone permissions must allow network discovery.
If any of these conditions fail, the Wi-Fi name may not appear at all, or it may appear briefly and disappear during scanning.
Common Reasons the Holy Stone HS175 WiFi Is Not Showing
1. The drone is not fully powered on
A weak battery can cause the flight controller to start but not fully initialize Wi-Fi broadcasting.
Make sure the battery is charged, seated firmly, and the power sequence completes before checking for the network.
2. Pairing mode was not activated
Some Holy Stone drones require a specific startup sequence before the Wi-Fi signal becomes visible.
If the HS175 is not in pairing mode, the network may not broadcast at all.
3. Phone settings are blocking detection
Modern iPhones and Android devices can restrict local network access, location access, or Wi-Fi scanning permissions.
If those settings are disabled, the app may fail to find the drone even when the signal is present.
4. Another Wi-Fi network is interfering
Nearby routers, mesh systems, and other drone signals can interfere with detection.
Since the HS175 uses a local wireless link, crowded 2.4 GHz environments can reduce visibility.
5. The app is outdated or stuck
An outdated Holy Stone app version, a corrupted cache, or a frozen permission prompt can stop the Wi-Fi connection process.
Reinstalling or updating the app often resolves this quickly.
6. The drone or phone needs a reset
Like many consumer drones, the HS175 can temporarily fail to broadcast its SSID after an incomplete shutdown, crash, or interrupted pairing attempt.
A full power cycle often restores normal behavior.
Step-by-Step Fixes for Holy Stone HS175 WiFi Not Showing
Check the battery and power sequence
Start with the basics.
Fully charge the battery, insert it securely, and power on the drone in a quiet area away from routers and other wireless devices.
Wait for the startup indicators to stabilize before searching for Wi-Fi on your phone.
- Use a fully charged battery.
- Remove and reinstall the battery if power seems unstable.
- Wait 30 to 60 seconds after startup.
- Keep the drone within a few feet of your phone during setup.
Restart the drone and the phone
A restart clears temporary errors in both devices.
Turn the drone off completely, close the app, restart your phone, then power the drone back on and look for the signal again.
If your phone has been connected to many Wi-Fi networks, temporarily forget unnecessary networks to reduce conflicts during scanning.
Turn off mobile data switching and Wi-Fi assist features
Some phones try to leave weak Wi-Fi networks and switch back to cellular data.
That behavior can interfere with the HS175 setup flow.
Disable features that automatically prefer internet access over local device connections while pairing.
- On iPhone, review Wi-Fi Assist and local network permissions.
- On Android, disable adaptive connectivity features if they interfere.
- Keep airplane mode off unless the app specifically requires a controlled setup environment.
Enable the correct app permissions
The Holy Stone app may need location permission, nearby device access, or local network access to detect the drone’s broadcast.
Without these permissions, the Wi-Fi network may technically exist but remain invisible inside the app.
- Allow location access when using the app.
- Allow nearby devices or local network access if prompted.
- Make sure Bluetooth is enabled if your device uses it during discovery.
Forget the drone network and rescan
If your phone previously saw the HS175 network but cannot see it now, open Wi-Fi settings, forget the old drone network entry, and scan again.
Cached network profiles can cause detection problems after failed pairing attempts.
Move away from interference sources
Set up the drone outdoors or in a clean indoor area with fewer wireless signals.
Large routers, Bluetooth speakers, cordless phone bases, and crowded apartment Wi-Fi channels can all reduce the chance that the HS175 network appears promptly.
Reinstall or update the Holy Stone app
If the app is not responding properly, delete it, reinstall the latest version from the App Store or Google Play, and grant permissions again.
This step fixes many pairing issues caused by app corruption or outdated compatibility.
Phone-Specific Checks That Matter
iPhone troubleshooting points
On iPhone, the biggest blockers are often Local Network permission, Location Services, and aggressive Wi-Fi behavior when the phone sees no internet access.
Review the app settings and ensure the device is not silently dropping the drone connection.
- Settings > Privacy & Security > Location Services
- Settings > Holy Stone app permissions
- Settings > Wi-Fi to confirm the drone network is visible
Android troubleshooting points
On Android, battery optimization, location settings, and network switching features can interfere with discovery.
If the HS175 Wi-Fi is not showing, verify the app has permission to scan nearby devices and access location.
- Turn on Location services.
- Allow the app to access nearby devices.
- Disable battery optimization for the app during setup.
When the HS175 Wi-Fi Appears but Still Will Not Connect
Sometimes the issue is not complete invisibility.
The network may appear, but the phone fails to connect, drops immediately, or shows no live video feed.
In that case, the broadcast is working, but the pairing process is unstable.
Try these actions:
- Disconnect from all other Wi-Fi networks first.
- Connect manually through the phone’s Wi-Fi menu if the app fails.
- Keep the phone close to the drone during first-time pairing.
- Close background apps that may interrupt the connection.
- Power cycle both devices and try again.
How to Tell Whether the Problem Is the Drone or the Phone
If possible, test the HS175 with a second phone.
If the network appears on another device, the drone is likely working and the original phone has a settings or compatibility issue.
If the Wi-Fi does not appear on any phone, the drone may need a deeper reset or inspection.
Also look for signs that the drone is booting normally.
LED indicators, startup sounds, and responsive controls suggest the controller is functioning even if the SSID is temporarily hidden.
Preventing Future Wi-Fi Detection Problems
Once the connection is restored, a few habits can reduce future failures.
Keep the app updated, charge the battery fully before flights, and use a consistent startup routine.
Avoid turning the drone on and off rapidly, since incomplete shutdowns can confuse the Wi-Fi module.
- Update the Holy Stone app regularly.
- Store and charge the battery properly.
- Use the drone in low-interference areas when pairing.
- Review phone permissions after software updates.
- Do a clean restart before each new pairing session.
For users who fly often, it helps to treat the first connection as a setup step rather than a quick tap-and-go action.
A stable pairing process usually starts with correct power, clear permissions, and minimal wireless interference.
What to Do If Nothing Makes the Wi-Fi Show Up
If every standard fix fails, the problem may involve a damaged Wi-Fi module, firmware fault, or hardware issue in the drone’s control board.
At that stage, document the troubleshooting steps you already tried and contact Holy Stone support with the model details and symptoms.
Before reaching out, note whether the battery charges normally, whether the drone powers on, and whether any LEDs behave unusually.
Those details make support faster and help identify whether the issue is isolated to connectivity or part of a larger power problem.