Why the Holy Stone HS720 WiFi Not Showing Happens
If your Holy Stone HS720 WiFi is not showing, the drone and your phone are usually failing to complete the short-range wireless handshake needed for app pairing.
The issue can come from power, app permissions, signal interference, or a setup mismatch that is easy to miss.
The HS720 uses Wi-Fi to link with the Holy Stone app on iOS or Android, so even a small configuration problem can make the network disappear from your phone’s available connections.
Understanding where the breakdown occurs is the fastest way to fix it.
First Checks Before Troubleshooting
Before changing settings, confirm that the drone is actually powered on and ready to broadcast its Wi-Fi signal.
A partially charged battery, incomplete startup sequence, or an active takeoff state can prevent the network from appearing.
- Charge the drone battery fully before testing.
- Turn the drone off, then power it back on after a short pause.
- Keep the phone close to the aircraft during pairing.
- Make sure airplane mode is disabled on the phone.
- Move away from routers, Bluetooth speakers, and other wireless sources.
How the HS720 Wi-Fi Connection Works
The Holy Stone HS720 typically creates a local Wi-Fi connection that your phone uses to communicate with the drone and access the live camera feed.
This is not the same as home internet, and it does not require a router.
Because the connection is direct, your phone may need to temporarily disconnect from your normal Wi-Fi network to join the drone.
If the phone is set to prefer stronger internet connections automatically, it may ignore the drone network or switch away from it too quickly.
Check the Drone Startup Sequence
The HS720 Wi-Fi signal may not appear if the drone has not completed its boot process.
Wait for the indicator lights to stabilize before scanning for the network on your phone.
- Power on the remote controller first if your model setup requires it.
- Then power on the drone and wait for the LEDs to settle.
- Open the Holy Stone app only after the aircraft finishes starting up.
- Look for the default SSID name printed in the manual or on the drone label.
If the startup sequence is interrupted, restart the drone and try again from the beginning.
Why the Wi-Fi Network May Be Hidden
One of the most common reasons the Holy Stone HS720 WiFi is not showing is that the network is present but your phone is not displaying it.
This can happen when saved network settings, privacy controls, or compatibility issues interfere with scanning.
Phone settings that can block detection
- Wi-Fi scanning permissions disabled for the Holy Stone app.
- Location services turned off on Android, which can limit Wi-Fi discovery.
- VPN active, causing network switching problems.
- Private MAC address settings that confuse some direct-drone networks.
- Auto-join preferences that keep the phone attached to home Wi-Fi.
For best results, temporarily forget the home network, disable VPN services, and allow the app to use location access if the operating system requests it.
App and Firmware Issues to Rule Out
An outdated Holy Stone app or outdated drone firmware can cause connection failures even when the hardware is working correctly.
App updates often include compatibility fixes for newer Android and iPhone versions.
Try these steps if the Wi-Fi still does not appear:
- Delete and reinstall the Holy Stone app from the App Store or Google Play.
- Check for app updates before launching the software.
- Restart the phone after reinstalling the app.
- Look for firmware update guidance in the HS720 manual or official support resources.
If the drone was stored for a long period, an older firmware state may be less compatible with current mobile operating systems.
Interference and Range Problems
Wireless interference can prevent the HS720 from broadcasting clearly enough for your phone to detect.
Wi-Fi congestion is especially common in apartments, offices, and neighborhoods with many routers.
To reduce interference, test the drone outdoors or in an open area with fewer competing signals.
Keep the phone within a short range of the aircraft, and avoid testing near microwaves, metal structures, or large wireless devices.
Signs interference is the real problem
- The Wi-Fi network appears briefly, then disappears.
- The connection works in one location but not another.
- The app connects inconsistently after repeated attempts.
- Signal strength drops quickly even when the drone is nearby.
Controller and Pairing Sequence Conflicts
Some Holy Stone setups rely on a specific pairing order between the remote controller, drone, and mobile app.
If the order is wrong, the Wi-Fi network may not broadcast correctly or the app may fail to detect it.
Use the procedure recommended in the HS720 user manual.
If your model uses both controller binding and app Wi-Fi, complete the controller connection first, then connect the phone to the drone network.
Android and iPhone Fixes That Often Work
Mobile operating system settings can be the deciding factor when the Holy Stone HS720 WiFi is not showing.
Both Android and iOS protect direct wireless connections in ways that can affect drone apps.
On Android
- Enable location services for Wi-Fi scanning.
- Turn off adaptive connectivity or smart network switching if available.
- Allow the Holy Stone app all requested permissions.
- Clear the app cache if the network list is stale.
On iPhone
- Go to Settings and confirm the Holy Stone app has local network access.
- Disable Low Data Mode temporarily.
- Forget and reconnect to the drone network if it previously failed.
- Close background apps that may interfere with wireless switching.
After changing settings, restart the app and rescan for the drone network.
Reset Steps to Try When Nothing Appears
If the HS720 Wi-Fi still does not show up, perform a clean reset of the pairing process.
This helps remove stale session data from the app and the phone.
- Power off the drone and remote controller.
- Forget the drone network from your phone if it was saved before.
- Disable VPN, Bluetooth, and any network optimizer apps.
- Restart the phone.
- Power on the drone again and wait for full startup.
- Open the app and check for the Wi-Fi SSID again.
If available, test the drone with another phone.
A successful connection on a second device usually points to a phone setting rather than a drone fault.
When the Problem Is Hardware-Related
If multiple phones cannot see the network and the drone never shows normal startup indicators, the issue may be hardware-related.
Possible causes include a damaged Wi-Fi module, internal antenna damage, or battery power delivery problems.
Hardware symptoms often include no broadcast signal at all, unusual LED behavior, or frequent resets during startup.
In that case, contact Holy Stone support or the retailer with the model number, purchase details, and a description of the tests you already performed.
Best Practices to Prevent Future Wi-Fi Problems
Once you restore the connection, a few habits can reduce future pairing failures.
Keep the app updated, store the drone with a charged battery, and follow the same startup order each time you fly.
- Update the Holy Stone app regularly.
- Use the drone in open areas with less wireless interference.
- Avoid switching between home Wi-Fi and drone Wi-Fi too quickly.
- Power cycle the drone and phone before troubleshooting repeated failures.
- Keep the HS720 manual handy for the exact binding sequence.
Consistent setup matters with direct Wi-Fi drones like the HS720, and the same simple routine often prevents the network from disappearing in the first place.